Huawei Certified ICT Associate H35-210_V2.5 Dumps | Updated Aug 26, 2021 - DumpsActual
Master 2021 Latest The Questions Huawei Certified ICT Associate and Pass H35-210_V2.5 Real Exam!
NEW QUESTION 153
With regard to the three VLANs with different attributes (common, QinQ, and Stacking), the MA5600T uses the default tag transformation rules (that is, tag-transform is set to default) when configuring the service flow. Which one of the following descriptions is incorrect?
- A. common vlan service flow, for the service flow without tag, the default is add, for the service flow with tag, the default is translate
- B. The default mode of all QinQ VLAN service flows is add
- C. None of the above
- D. stacking vlan service flow, the default is add-double for those without tags; the default is translate-and-add for service flows with tags
Answer: C
NEW QUESTION 154
Is the following description correct? ADSL2+ is an extension of ADSL technology, supporting a downlink rate of up to 24Mbit/s and an uplink rate of 2.5Mbit/s, and the longest transmission distance can reach 6.5km.
- A. True
- B. False
Answer: A
NEW QUESTION 155
Which of the following is not an ONT product?
- A. HG8245
- B. HG510V
- C. HG8247
- D. HG8010
Answer: B
NEW QUESTION 156
Perform data configuration on the OLT. When adding a gemport, usually select the type of service carried by the gemport. Which of the following business types does gemport support?
- A. POTs
- B. TDM
- C. E1
- D. ETH
Answer: B,D
NEW QUESTION 157
Which of the following are correct for GPON product business specifications?
- A. HG8245 supports 256 tconts
- B. MA5680T each board can provide 4-8 GPON ports, which can support 1:64 split ratio
- C. The fiber length of the PON port must be within 20KM
- D. SCUL supports optical and copper integrated access
Answer: B,D
NEW QUESTION 158
MA5600T checks whether the currently running single board software version meets the requirements for on-site deployment. Which command is used?
- A. display language
- B. display board
- C. All of the above
- D. display version
Answer: D
NEW QUESTION 159
During the configuration of the EPON PPPoE service, what templates need to be configured to increase the MDU?
- A. Route template
- B. Traffic template
- C. System parameter template
- D. DBA template
Answer: A,D
NEW QUESTION 160
Is the following description correct? In PON networks, multimode optical fibers are often used.
- A. False
- B. True
Answer: A
NEW QUESTION 161
Which control frame messages are defined by MPCP?
- A. GATE
- B. REPORT
- C. REGISTER
- D. REGISTER ACK
Answer: A,B,C,D
NEW QUESTION 162
In Huawei DSLAM products, which of the following attributes VLAN has two layers of VLAN TAG information?
- A. Common vlan
- B. Super vlan
- C. QinQ vlan
- D. Stacking vlan
Answer: C,D
NEW QUESTION 163
MA5600T/MA5680T What is the command to query GPON working mode?
- A. #display xpon mode
- B. All of the above
- C. (diagnose)%%display xpon mode
- D. #(config)display xpon mode
Answer: C
NEW QUESTION 164
What are the operations that need to be performed when adding ONT to MA5680T?
- A. Add ONT and bind related templates
- B. Configure DBA template
- C. Configure ONT service template
- D. Configure the ONT line profile
Answer: A,B,C,D
NEW QUESTION 165
When MA5600T is newly launched and connected to the network management system, which of the following descriptions are correct?
- A. Add a static route, the destination address is the network segment where the network management IP is located
- B. The configuration of the SNMP version should be the same as the configuration on the U2000 side
- C. The interface IP address of the MA5600T used for management must be in the same network segment as the network management IP address
- D. The configuration of read community name and write community name is the same as that on the network management side.
Answer: A,B,D
NEW QUESTION 166
According to the H.248 protocol, what is the type of terminal occupied when the telephone terminal is off-hook?
- A. Persistent Terminal
- B. Semi-permanent terminal
- C. Permanent terminal
- D. Temporary terminal
Answer: B
NEW QUESTION 167
MA5600T provides various networking protection functions. Which of the following protection features is usually used for upstream port protection?
- A. Smart Link and Monitor Link features
- B. GPON Type C protection
- C. GPON Type B protection
- D. Ethernet link aggregation
Answer: A,D
NEW QUESTION 168
Which of the following methods can be used for the reset test of the MA5600T/MA5680T single board?
- A. All of the above
- B. Press the RESET button on the handle bar of the main control board to forcibly reset the main control board. Observe whether the main control board can return to normal after resetting.
- C. Hot-swappable the board, check whether the board can be restored to normal after reset
- D. Use the command board reset to reset the service board. Check whether the service board can be restored to normal after resetting.
Answer: A
NEW QUESTION 169
Which of the following modules is not a functional module of the MA5600 SCU main control board?
- A. Separator module
- B. CPU module
- C. Clock module
- D. Ethernet switch module
Answer: A
NEW QUESTION 170
Regarding MA5600T/MA5680T Ethernet link aggregation, which of the following statements is wrong?
- A. Supports link aggregation in load sharing mode and non-load sharing mode (active/standby mode).
- B. Support manual configuration and static LACP link aggregation, but does not support dynamic LACP link aggregation.
- C. Supports up to 512 aggregation groups, and each aggregation group includes up to 8 physical ports.
- D. Cross-board aggregation is not supported
Answer: D
NEW QUESTION 171
......
A fully updated 2021 H35-210_V2.5 Exam Dumps exam guide from training expert DumpsActual: https://www.dumpsactual.com/H35-210_V2.5-actualtests-dumps.html
Practice To H35-210_V2.5 - DumpsActual Remarkable Practice On your HCIA-Access V2.5 Exam: https://drive.google.com/open?id=1MDGSIQzupqSmicMkFiOxfEKx_c9wQnRJ
