Use Real NSE7_SDW-6.4 - 100% Cover Real Exam Questions [Aug-2021]
Dumps Brief Outline Of The NSE7_SDW-6.4 Exam - DumpsActual
NEW QUESTION 11
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the traffic shaping policy and exhibit B show: the firewall policy FortiGate is not performing traffic shaping as expected basi on the policies shown in the exhibits.
To correct this traffic shaping issue on FortiGate, what configuration change must be made on which policy?
- A. The URL category must be specified on the traffic shaping policy
- B. The application control profile must be enabled on the firewall policy.
- C. The shaper mode must be applied per-IP shaper on the traffic shaping policy
- D. The web filter profile must be enabled on the firewall policy
Answer: D
NEW QUESTION 12
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A, which shows the SD-WAN performance SLA and exhibit B shows the health of the participating SD-WAN members.
Based on the exhibits, which statement is correct?
- A. The SLA state of port2 has exceeded three consecutive unanswered requests from the SLA server.
- B. Port2 needs to wait 500 milliseconds to change the status from alive to dead.
- C. Check interval is the time to wait before a packet sent by a member interface considered as lost.
- D. The dead member interface stays unavailable until an administrator manually brings the interface back.
Answer: A
NEW QUESTION 13
Which statement about using BGP routes in SD-WAN is true?
- A. Adding static routes must be enabled on all ADVPN interfaces.
- B. Learned routes can be used as dynamic destinations in SD-WAN rules
- C. Dynamic routing protocols can be used only with non-encrypted traffic
- D. VPN topologies must be form using only BGP dynamic routing with SD-WAN
Answer: B
NEW QUESTION 14
What are two benefits of using FortiManager to organize and manage the network for a group of FortiGate devices? (Choose two )
- A. It simplifies the deployment and administration of SD-WAN on managed FortiGate devices
- B. It improves SD-WAN performance on the managed FortiGate devices.
- C. It acts as a policy compliance entity to review all managed FortiGate devices
- D. It reduces WAN usage on FortiGate devices by acting as a local FortiGuard server
- E. It sends probe signals as health checks to the beacon servers on behalf of FortiGate
Answer: A,D
NEW QUESTION 15
What would best describe the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?
- A. Interface-based shaping mode
- B. Per-IP shaping mode
- C. Reverse policy shaping mode
- D. Shared policy shaping mode
Answer: A
NEW QUESTION 16
Which diagnostic command you can use to show interface-specific SLA logs for the last 10 minutes?
- A. diagnose sys virtual-wan-link health-check
- B. diagnose sys virtual-wan-link intf-sla-log
- C. diagnose sys virtual-wan-link sla-log
- D. diagnose sys virtual-wan-link log
Answer: C
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/943037/sla-logging
NEW QUESTION 17
Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?
- A. The 10 Mbps bandwidth is shared equally among the IP addresses.
- B. A single user uses the allocated bandwidth divided by total number of users.
- C. Each IP is guaranteed a minimum 10 Mbps of bandwidth
- D. FortiGate allocates each IP address a maximum 10 Mbps of bandwidth.
Answer: D
NEW QUESTION 18
Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two )
- A. It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub
- B. It provides direct connectivity between all sites by creating on-demand tunnels between spokes.
- C. It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links
- D. It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance
Answer: A,C
NEW QUESTION 19
Refer to the exhibit.
Multiple IPsec VPNs are formed between two hub-and-spokes groups, and site-to-site between Hub 1 and Hub 2 The administrator configured ADVPN on the dual regions topology
Which two statements are correct if a user in Toronto sends traffic to London? (Choose two )
- A. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
- B. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.
- C. London generates an IKE information message that contains the Toronto public IP address
- D. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN
Answer: A,D
NEW QUESTION 20
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set cost 15.
- B. Set source 100.64.1.1.
- C. Set load-balance-mode source-ip-ip-based.
- D. Set priority 10.
Answer: B
NEW QUESTION 21
Refer to exhibits.
Exhibit A shows the performance SLA exhibit B shows the SD-WAN diagnostics output.
Based on the exhibits, which statement is correct?
- A. SD-WAN member interfaces are affected by the SLA state of the inactive interface
- B. The SLA state of port1 is dead after five unanswered requests by the SLA servers.
- C. Port1 became dead 1ecause no traffic was offload through the egress of port1.
- D. Both SD-WAN member interfaces have used separate SLA targets.
Answer: B
NEW QUESTION 22
Refer to exhibits.
Exhibit B.
Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.
The traffic shaping policy is being applied to all outbound traffic however inbound traffic is not being evaluated by the shaping policy Based on the exhibit, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic'?
- A. The guaranteed-10mbps option must be selected as the per-IP shaper option
- B. A new firewall policy must be created and SD-WAN must be selected as the incoming interface.
- C. The guaranteed-10mbps option must be selected as the reverse shaper option.
- D. The reverse shaper option must be enabled and a traffic shaper must be selected
Answer: C
NEW QUESTION 23
Refer to the exhibit.
Which statement about the trace evaluation by FomGate is true?
- A. The packet exceeded the configured bandwidth and was dropped based on the priority configuration
- B. The packet exceeded the configured maximum bandwidth and was dropped by the shared shaper.
- C. Packets exceeding the configured concurrent connection limit are dropped based on tfte priority configuration.
- D. Packets exceeding the configured maximum concurrent connection limit are denied by the per-IP shaper.
Answer: C
NEW QUESTION 24
Refer to exhibits.
Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic.
Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)
- A. The implicit rule overrides all other rules because parameters widely cover sources and destinations.
- B. SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom.
- C. The initial session of an application goes through a learning phase in order to apply the correct rule.
- D. The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces.
Answer: A,B
NEW QUESTION 25
Which statement reflects how BGP tags work with SD-WAN rules?
- A. Route tags are used for a BGP community and the SD-WAN rules are assigned the same tag
- B. VPN topologies are formed using only BGP dynamic routing with SD-WAN
- C. BGP tags require that the adding of static routes be enabled on all ADVPN interfaces
- D. BGP tags match the SD-WAN rule based on the order that these rules were installed.
Answer: B
NEW QUESTION 26
What are the two minimum configuration requirements for an outgoing interface to be selected once the SD-WAN logical interface is enabled? (Choose two )
- A. Specify incoming interfaces in SD-WAN rules.
- B. Configure SD-WAN rules interface preference.
- C. Select SD-WAN balancing strategy.
- D. Specify outgoing interface routing cost.
Answer: B,D
NEW QUESTION 27
Which diagnostic command can you use to show the SD-WAN rules interface information and state?
- A. diagnose sys virtual-wan-link member.
- B. diagnose sys virtual-wan-link neighbor.
- C. diagnose sys virtual-wan-link service
- D. diagnose sys virtual-wan-link route-tag-list
Answer: A
NEW QUESTION 28
Which diagnostic command you can use to show interface-specific SLA logs for the last 10 minutes?
- A. diagnose sys virtual-wan-link health-check
- B. diagnose sys virtual-wan-link sla-lcg
- C. diagnose sys virtual-wan-link intf-sla-log
- D. diagnose sys virtual-wan-link log
Answer: A
NEW QUESTION 29
Refer to the exhibit.
Multiple IPsec VPNs are formed between two hub-and-spokes groups, and site-to-site between Hub 1 and Hub 2 The administrator configured ADVPN on the dual regions topology
Which two statements are correct if a user in Toronto sends traffic to London? (Choose two )
- A. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
- B. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.
- C. London generates an IKE information message that contains the Toronto public IP address
- D. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN
Answer: A,D
NEW QUESTION 30
Which statement is correct about the SD-WAN and ADVPN?
- A. Dynamic VPN is not supported as an SD-Wan interface.
- B. Spoke support dynamic VPN as a static interface.
- C. ADVPN interface can be a member of SD-WAN interface.
- D. Hub FortiGate is limited to use ADVPN as SD-WAN member interface.
Answer: A
NEW QUESTION 31
Which three parameters are available to configure SD-WAN rules? (Choose three.)
- A. Internet service database (ISDB) address object
- B. Application signatures
- C. URL categories
- D. Source and destination IP address
- E. Type of physical link connection
Answer: A,C,D
NEW QUESTION 32
What is the lnkmtd process responsible for?
- A. Flushing route tags addresses
- B. Monitoring links for any bandwidth saturation
- C. Logging interface quality information
- D. Processing performance SLA probes
Answer: B
NEW QUESTION 33
Which two statements describe how IPsec phase 1 main mode is different from aggressive mode when performing IKE negotiation? (Choose two )
- A. The use of Diffie Hellman keys is limited by the responderand needs initiator acceptance
- B. A total of six packets are exchanged between an initiator and a responder instead of three packets.
- C. XAuth is enabled as an additional level of authentication which requires a username and password
- D. A peer ID is included in the first packet from the initiator, along with suggested security policies
Answer: C
NEW QUESTION 34
Which components make up the secure SD-WAN solution?
- A. Application, antivirus, and URL, and SSL inspection
- B. Datacenter, branch offices, and public cloud
- C. Telephone, ISDN, and telecom network.
- D. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
Answer: D
NEW QUESTION 35
......
Certification Training for NSE7_SDW-6.4 Exam Dumps Test Engine: https://www.dumpsactual.com/NSE7_SDW-6.4-actualtests-dumps.html
NSE7_SDW-6.4 Training & Certification Get Latest NSE 7 Network Security Architect : https://drive.google.com/open?id=1bdvCQOzY-BScrtah92GgL83i3AQhVPbn
