Updated PDF (New 2024) Actual Fortinet NSE7_OTS-7.2 Exam Questions
Verified NSE7_OTS-7.2 Exam Dumps PDF [2024] Access using DumpsActual
To prepare for the Fortinet NSE7_OTS-7.2 Exam, candidates can take advantage of the various resources available, such as online training courses, study materials, and practice exams. NSE7_OTS-7.2 exam consists of 60 multiple-choice questions, and candidates have 120 minutes to complete it. To pass the exam, candidates must score at least 70%. Fortinet NSE 7 - OT Security 7.2 certification is valid for two years, after which candidates must retake the exam to maintain their certification status. Overall, the Fortinet NSE7_OTS-7.2 Exam is an excellent opportunity for professionals to validate their skills and knowledge in OT security and gain recognition as experts in the field.
NEW QUESTION # 19
Refer to the exhibit.
Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)
- A. Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.
- B. FortiGate-3 and FortiGate-4 devices must be in a transparent mode.
- C. Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.
- D. IT and OT networks are separated by segmentation.
Answer: C,D
NEW QUESTION # 20
Which three Fortinet products can be used for device identification in an OT industrial control system (ICS)?
(Choose three.)
- A. FortiManager
- B. FortiAnalyzer
- C. FortiNAC
- D. FortiGate
- E. FortiSIEM
Answer: C,D,E
Explanation:
Explanation
A: FortiNAC - FortiNAC is a network access control solution that provides visibility and control over network devices. It can identify devices, enforce access policies, and automate threat response.
D: FortiSIEM - FortiSIEM is a security information and event management solution that can collect and analyze data from multiple sources, including network devices and servers. It can help identify potential security threats, as well as monitor compliance with security policies and regulations.
E: FortiAnalyzer - FortiAnalyzer is a central logging and reporting solution that collects and analyzes data from multiple sources, including FortiNAC and FortiSIEM. It can provide insights into network activity and help identify anomalies or security threats.
NEW QUESTION # 21
Refer to the exhibit and analyze the output.
Which statement about the output is true?
- A. This is a sample of FortiGate interface statistics.
- B. This is a sample of a PAM event type.
- C. This is a sample of an SNMP temperature control event log.
- D. This is a sample of a FortiAnalyzer system interface event log.
Answer: B
NEW QUESTION # 22
Refer to the exhibit.
You are navigating through FortiSIEM in an OT network.
How do you view information presented in the exhibit and what does the FortiGate device security status tell you?
- A. In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.
- B. In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.
- C. In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.
- D. In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.
Answer: B
NEW QUESTION # 23
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?
- A. Under config user settings configure set auth-on-demand implicit.
- B. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
- C. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
- D. Enable two-factor authentication with FSSO.
Answer: C
Explanation:
Explanation
The OT supervisor should configure a firewall policy with FSSO users and place it on the top of list of firewall policies in order to achieve the goal of authenticating users against passive authentication first and, if passive authentication is not successful, then challenging them with active authentication.
NEW QUESTION # 24
You are investigating a series of incidents that occurred in the OT network over past 24 hours in FortiSIEM.
Which three FortiSIEM options can you use to investigate these incidents? (Choose three.)
- A. IPS
- B. Risk
- C. Security
- D. Overview
- E. List
Answer: B,D,E
NEW QUESTION # 25
What are two critical tasks the OT network auditors must perform during OT network risk assessment and management? (Choose two.)
- A. Creating disaster recovery plans to switch operations to a backup plant
- B. Evaluating what can go wrong before it happens
- C. Planning a threat hunting strategy
- D. Implementing strategies to automatically bring PLCs offline
Answer: A,D
NEW QUESTION # 26
An OT architect has deployed a Layer 2 switch in the OT network at Level 1 the Purdue model-process control. The purpose of the Layer 2 switch is to segment traffic between PLC1 and PLC2 with two VLANs.
All the traffic between PLC1 and PLC2 must first flow through the Layer 2 switch and then through the FortiGate device in the Level 2 supervisory control network.
What statement about the traffic between PLC1 and PLC2 is true?
- A. In order to communicate, PLC1 must be in the same VLAN as PLC2.
- B. PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.
- C. The Layer 2 switches routes any traffic to the FortiGate device through an Ethernet link.
- D. The Layer 2 switch rewrites VLAN tags before sending traffic to the FortiGate device.
Answer: B
Explanation:
Explanation
The statement that is true about the traffic between PLC1 and PLC2 is that PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.
NEW QUESTION # 27
An OT administrator is defining an incident notification policy using FortiSIEM and would like to configure the system with a notification policy. If an incident occurs, the administrator would like to be able to intervene and block an IP address or disable a user in Active Directory from FortiSIEM.
Which step must the administrator take to achieve this task?
- A. Create a notification policy and define a script/remediation on FortiSIEM.
- B. Configure a fabric connector with a notification policy on FortiSIEM to connect with FortiGate.
- C. Define a script/remediation on FortiManager and enable a notification rule on FortiSIEM.
- D. Deploy a mitigation script on Active Directory and create a notification policy on FortiSIEM.
Answer: A
Explanation:
Explanation
https://fusecommunity.fortinet.com/blogs/silviu/2022/04/12/fortisiempublishingscript
NEW QUESTION # 28
Refer to the exhibit.
An OT network security audit concluded that the application sensor requires changes to ensure the correct security action is committed against the overrides filters.
Which change must the OT network administrator make?
- A. Change the security action of the industrial category to monitor.
- B. Set the priority of the C.BO.NA.1 signature override to 1.
- C. Set all application categories to apply default actions.
- D. Remove IEC.60870.5.104 Information.Transfer from the first filter override.
Answer: B
Explanation:
Explanation
According to the Fortinet NSE 7 - OT Security 6.4 exam guide1, the application sensor settings allow you to configure the security action for each application category andnetwork protocol override. The security action determines how the FortiGate unit handles traffic that matches the application category or network protocol override. The security action can be one of the following:
Allow: The FortiGate unit allows the traffic without any further inspection.
Monitor: The FortiGate unit allows the traffic and logs it for monitoring purposes.
Block: The FortiGate unit blocks the traffic and logs it as an attack.
The priority of the network protocol override determines the order in which the FortiGate unit applies the security action to the traffic. The lower the priority number, the higher the priority. For example, a priority of 1 is higher than a priority of 10.
In the exhibit, the application sensor has the following settings:
The industrial category has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that belongs to this category.
The IEC.60870.5.104 Information.Transfer network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The IEC.60870.5.104 Control.Functions network protocol override has a security action of monitor, which means that the FortiGate unit will allow and log any traffic that matches this protocol.
The IEC.60870.5.104 Start/Stop network protocol override has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that matches this protocol.
The IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The problem with these settings is that the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a lower priority than the IEC.60870.5.104 Information.Transfer network protocol override. This means that if the traffic matches both protocols, the FortiGate unit will apply the security action of the higher priority override, which is block. However, the IEC.60870.5.104 Transfer.C.BO.NA.1 protocol is used to transfer binary outputs, which are essential for controlling OT devices. Therefore, blocking this protocol could have negative consequences for the OT network.
To fix this issue, the OT network administrator must set the priority of the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override to 1, which is higher than the priority of the IEC.60870.5.104 Information.Transfer network protocol override. This way, the FortiGate unit will apply the security action of the lower priority override, which is allow, to the traffic that matches both protocols. This will ensure that the FortiGate unit does not block the traffic that is used to transfer binary outputs, while still blocking the traffic that is used to transfer information.
1: NSE 7 Network Security Architect - Fortinet
NEW QUESTION # 29
Refer to the exhibit.
An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)
- A. Port5 is not a member of the software switch.
- B. The FortiGate devices is in offline IDS mode.
- C. NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.
- D. The FortiGate-Edge device must be in NAT mode.
Answer: C,D
NEW QUESTION # 30
An OT supervisor needs to protect their network by implementing security with an industrial signature database on the FortiGate device.
Which statement about the industrial signature database on FortiGate is true?
- A. A supervisor can enable it through the FortiGate CLI.
- B. An administrator must create their own database using custom signatures.
- C. By default, the industrial database is enabled.
- D. A supervisor must purchase an industrial signature database and import it to the FortiGate.
Answer: A
NEW QUESTION # 31
Refer to the exhibits.
Which statement is true about the traffic passing through to PLC-2?
- A. The application filter overrides the default action of some IEC 104 signatures.
- B. IPS must be enabled to inspect application signatures.
- C. SSL Inspection must be set to deep-inspection to correctly apply application control.
- D. IEC 104 signatures are all allowed except the C.BO.NA 1 signature.
Answer: A
NEW QUESTION # 32
What can be assigned using network access control policies?
- A. FortiNAC device polling methods
- B. Profiling rules
- C. Layer 3 polling intervals
- D. Logical networks
Answer: D
NEW QUESTION # 33
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
- A. FortiSwitch
- B. FortiEDR
- C. FortiGate
- D. FortiNAC
Answer: C
Explanation:
Explanation
An OT network architect can accomplish the goal of securing control area zones with a single network access policy to provision devices to any number of different networks on a FortiGate device.
NEW QUESTION # 34
As an OT administrator, it is important to understand how industrial protocols work in an OT network.
Which communication method is used by the Modbus protocol?
- A. It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.
- B. It uses OSI Layer 2 and the secondary device sends data based on request from primary device.
- C. It uses OSI Layer 2 and the primary device sends data based on request from secondary device.
- D. It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.
Answer: B
NEW QUESTION # 35
What triggers Layer 2 polling of infrastructure devices connected in the network?
- A. A linkup or linkdown trap
- B. A failed Layer 3 poll
- C. A matched security policy
- D. A matched profiling rule
Answer: A
NEW QUESTION # 36
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted from credentials during authentication.
What is a possible reason?
- A. FortiGate determined the user by passive authentication
- B. FortiNAC determined the user by DHCP fingerprint method
- C. Two-factor authentication is not configured with RADIUS authentication method
- D. The user was determined by Security Fabric
Answer: A
NEW QUESTION # 37
Refer to the exhibit.
Which statement about the interfaces shown in the exhibit is true?
- A. The VLAN ID of port1-vlan1 can be changed to the VLAN ID 10.
- B. port1, port1-vlan10, and port1-vlan1 are in different broadcast domains
- C. port1-vlan10 and port2-vlan10 are part of the same broadcast domain
- D. port2, port2-vlan10, and port2-vlan1 are part of the software switch interface.
Answer: B
NEW QUESTION # 38
......
The Fortinet NSE7_OTS-7.2 exam consists of 60 multiple-choice questions that need to be completed within 120 minutes. The passing score for the exam is 70%, and candidates can take the exam in English or Japanese. NSE7_OTS-7.2 exam is available through Pearson VUE testing centers worldwide, and candidates can register for the exam through the Fortinet NSE Institute.
Try Best NSE7_OTS-7.2 Exam Questions from Training Expert DumpsActual: https://www.dumpsactual.com/NSE7_OTS-7.2-actualtests-dumps.html
Practice Examples and Dumps & Tips for 2024 Latest NSE7_OTS-7.2 Valid Tests Dumps: https://drive.google.com/open?id=1JsSuCySSgAclGUe-DzKsaeNpAaglYpVm
