Get Started: NACE-CIP2-001 Exam [2023] Dumps NACE PDF Questions
NACE-CIP2-001 Premium Exam Engine pdf Download
NEW QUESTION 24
Surface preparation of concrete is performed using:
- A. Methods that have been modified for concrete
- B. Methods that are completely different to steel
- C. Methods that are exactly the same as steel
- D. Methods that are the same as wood
Answer: A
NEW QUESTION 25
When performing an adhesion test in accordance with ASTM D 3359 where the Dry Film Thickness is approximately 10 mils, the Inspector should use:
- A. Method A - X Cut
- B. Method B - Cross Hatch
- C. Method B - X cut
- D. Method A - Cross Hatch
Answer: A
NEW QUESTION 26
You can use magnifiers to examine all of the following EXCEPT
- A. Mill scale
- B. Blisters
- C. Surface profile
- D. Surface cleanliness
Answer: D
NEW QUESTION 27
Generally for safety considerations, waterjetting hose connections use
- A. an oil/water separator.
- B. a whip-lock device.
- C. filters.
- D. a long wand.
Answer: B
NEW QUESTION 28
Antifouling coatings are regulated by international treaties.
- A. True
- B. False
Answer: A
NEW QUESTION 29
The Concrete Repair Institute's comparators can be used to assess:
- A. Surface cleanliness prior to coating
- B. Surface profile prior to coating
- C. Compressive and tensile strength prior to coating
- D. Contamination levels prior to coating
Answer: B
NEW QUESTION 30
Which standards are generally established by private-sector bodies and are available for use by any person or Organization, private or government?
- A. Mandatory
- B. Consensus
- C. Voluntary
- D. De facto
Answer: C
NEW QUESTION 31
Coating Surveys are legally required:
- A. On food and beverage vessels and can linings
- B. On water tanks and potable water pipelines
- C. On high pressure gas lines and fireproofed structures
- D. On commercial marine vessels and offshore platforms
Answer: D
NEW QUESTION 32
WJ-1 is always performed using UHWJ at pressures above 210 MPa (30,000 PSI)
- A. True
- B. False
Answer: A
NEW QUESTION 33
It is always possible to see moisture on a steel substrate:
- A. True
- B. False
Answer: B
NEW QUESTION 34
Eddy current DFT gauges are used to measure Dry Film Thickness in which of the following situations:
- A. Conductive coatings applied to a cementitious substrate
- B. Magnetic coatings applied to a magnetic metallic substrate
- C. Non-Conductive coatings applied to a conductive metallic substrate
- D. Conductive coatings applied to a magnetic metallic substrate
Answer: C
NEW QUESTION 35
Steel shot grit contaminated with oil or grease used in a cetrifugal blast cleaning should be
- A. mixed with uncontaminated abrasive
- B. run through the air wash separator.
- C. washed with clean potable water prior to Use.
- D. disposed of properly.
Answer: D
NEW QUESTION 36
When measuring the Dry Film Thickness Of liquid coatings applied to galvanized ferrous substrates the most commonly used instrument is the:
- A. Tooke Gauge
- B. Ultra Sonic DFT Gauge
- C. Magnetic Gauge
- D. Eddy Current Gauge
Answer: A
NEW QUESTION 37
When performing testing in accordance with ASTM D 2583 the inspector may observe:
- A. Adhesion failure
- B. Cold flow or creep
- C. Glue failure
- D. Cohesion failure
Answer: B
NEW QUESTION 38
Application of Thermal Spray Coatings requires:
- A. Specialized skills supported by training and experience
- B. The same skills as welding
- C. No particular skills
- D. The same skills as liquid coatings
Answer: A
NEW QUESTION 39
Linings are used on the interior of pipelines to
- A. provide protection against soil chemicals.
- B. protect the transported product.
- C. reduce magnetic polarity.
- D. afford limited temperature insulation.
Answer: B
NEW QUESTION 40
......
Pass Your NACE Exam with NACE-CIP2-001 Exam Dumps: https://www.dumpsactual.com/NACE-CIP2-001-actualtests-dumps.html
Verified NACE-CIP2-001 Bundle Real Exam Dumps PDF: https://drive.google.com/open?id=1N5UC4BXL04MKGRaHtsV9ilkMdUzBrezE
