NACE-CIP2-001 Practice Dumps - Verified By DumpsActual Updated 100 Questions
Updated NACE-CIP2-001 Exam Dumps - PDF Questions and Testing Engine
NEW QUESTION 52
A reinforced coating is
- A. equally resistant to abrasion and impact as a non-reinforced coating.
- B. equally resistant to movement and impact as a non-reinforced coating.
- C. more resistant to movement, abrasion, and impact than a non-reinforced coating.
- D. less resistant to movement, abrasion, and impact than a non-reinforced coating.
Answer: C
NEW QUESTION 53
When performing inspection in accordance with ASTM D 4138 the Inspector will use:
- A. A mechanical adhesion tester
- B. A set of 14 pencils of varying hardness
- C. A destructive paint inspection Tooke gauge
- D. A hardness tester
Answer: C
NEW QUESTION 54
The best choice of instrument for holiday testing of thick film concrete coatings is:
- A. Low Voltage Sponge Type
- B. High Voltage DC Constant Current
- C. High Voltage AC
- D. High Voltage DC Pulse Type
Answer: B
NEW QUESTION 55
Cold-applied tape
- A. have a cross-linked polyethylene backing and a heat-activated adhesive.
- B. is typically green or led and looks like "painted" finish.
- C. is polyethylene film, heat laminated, 'With an adhesive layer of butyl glue.
- D. are identifiable by its distinct colors, usually light blue, green, Or Grey.
Answer: C
NEW QUESTION 56
You are the NACE Coating Inspector on a tank lining project and are asked to perform a high voltage holiday test after the coating applicators have completed their final repairs. After meeting all the confined space entry permit you enter the tank and notice a very strong odor of solvent.
Your first course of action should to:
- A. Investigate to find the source of the odor
- B. Don your air supplied respirator and continue the testing
- C. Exit the tank and document the incident in your daily report
- D. Exit the tank and immediately and report the problem to the nearest safety supervisor
Answer: D
NEW QUESTION 57
NACE/SSPC Water Jetting standards are directly equivalent to ISO Abrasive Blast Standards:
- A. True
- B. False
Answer: B
NEW QUESTION 58
Which product, is used in conjunction with other coatings such as FBE when the lines run through wetlands or a body of water?
- A. 3-Layet Polyethylene (PE)
- B. Coal Tar Enamel
- C. Concrete
- D. 2-Layet Polyethylene (PE)
Answer: C
NEW QUESTION 59
When environmental enclosures are being used an inspector needs to be concerned about:
- A. Structural integrity
- B. Air changes
- C. a), b), and c)
- D. Lighting
Answer: C
NEW QUESTION 60
When measuring the Dry Film Thickness Of liquid coatings applied to galvanized ferrous substrates the most commonly used instrument is the:
- A. Magnetic Gauge
- B. Ultra Sonic DFT Gauge
- C. Tooke Gauge
- D. Eddy Current Gauge
Answer: C
NEW QUESTION 61
Measuring methyl ethyl ketone (MEK) resistance of ethyl silicate inorganic zinc-rich primers by solvent rub requires
- A. 25 double rubs with a saturated cloth.
- B. 35 single rubs with a saturated cloth.
- C. 25 single rubs with a saturated cloth.
- D. 50 double rubs with a saturated cloth.
Answer: D
NEW QUESTION 62
Steel shot grit contaminated with oil or grease used in a cetrifugal blast cleaning should be
- A. washed with clean potable water prior to Use.
- B. run through the air wash separator.
- C. mixed with uncontaminated abrasive
- D. disposed of properly.
Answer: D
NEW QUESTION 63
Coating surveys may include which steps?
Select All That Apply:
- A. Summarize the collected data
- B. Develop a survey plan
- C. Schedule the remedial work
- D. Evaluate the coatings performance
Answer: A,B,C,D
NEW QUESTION 64
Thermal Spray coatings provide:
- A. Thermal protection
- B. Inhibitive protection
- C. Barrier protection
- D. Sacrificial protection
Answer: D
NEW QUESTION 65
NACE Standards include:
- A. a) & b)
- B. Standard Practices
- C. Material Requirements
- D. a) only
Answer: A
NEW QUESTION 66
As a NACE Level 2 Inspector on a field job; prior to submission your documentation should always reviewed and approved by:
- A. A NACE Protective Coating Specialist
- B. Another NACE Level 2 Inspector
- C. A NACE Level 3 Inspector
- D. A NACE Level 1 Inspector
Answer: C
NEW QUESTION 67
As a NACE Level 2 Inspector, NACE clearly indicates that you ate qualified to independently produce final documentation for a shop project.
- A. True
- B. False
Answer: A
NEW QUESTION 68
......
New (2022) NACE NACE-CIP2-001 Exam Dumps: https://www.dumpsactual.com/NACE-CIP2-001-actualtests-dumps.html
Best Way To Study For NACE NACE-CIP2-001 Exam Brilliant NACE-CIP2-001 Exam Questions PDF: https://drive.google.com/open?id=1Ggbi-Ta5fZ3cLAvfMpRGWhs92MeU5dxU
