Obtain the CPIM PDF Dumps Get 100% Outcomes Exam Questions For You To Pass
CPIM Exam Dumps Contains FREE Real Quesions from the Actual Exam
NEW QUESTION 130
Electric data interchange enables customers and suppliers to electromagnetically exchange transaction information.
- A. False
- B. True
Answer: A
NEW QUESTION 131
What is the updated forecast, utilizing exponential smoothing, given the following data?
Old Forecast = 100, actual demand = 80, alpha = 0.2, tracking signal = 0.9
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 132
Intermittent process layout is sometimes called product layout because the system is set up for a limited range of similar products.
- A. False
- B. True
Answer: A
NEW QUESTION 133
Which one of the following tools that cannot be used to evaluate feasibility of a strategy?
- A. None of these
- B. Break-Even analysis
- C. Resource deployment analysis
- D. Cash flow analysis and forecasting
Answer: A
NEW QUESTION 134
Which one of the following is a basic strategy to achieve the level of shortest lead time?
- A. Assemble-to-order
- B. None of these
- C. Make-to-stock
- D. Engineer-to-order
Answer: B
NEW QUESTION 135
A bill is used when companies usually make more than one product and the same components are often used in several products
- A. Multilevel bill
- B. Multiple bill
- C. Single-level bill
- D. Indented bill
Answer: B
NEW QUESTION 136
Currently, there is a trend towards more specialization in manufacturing whereby a factory specializes in a narrow product mix for a niche market. Generally, focused factories are thought to be more effectively and economically than more complex factories, the reason being that:
- A. All of these
- B. specialization has the disadvantage of inflexibility
- C. The focused factory may be a "factory within a factory," an area in an existing factory set aside to specialize in a narrow product mix
- D. repetition and concentration in one area allow the workforce and management to gain the advantages of specialization.
Answer: D
NEW QUESTION 137
The consolidation of several units into large units, called unit loads, so there is less handling, this is referred to as:
- A. Unitization
- B. Exclusiveness
- C. Itemization
- D. Solitary
Answer: A
NEW QUESTION 138
Capacity needs to be measured on following levels EXCEPT:
- A. Work center
- B. None of these
- C. Plant, which can be considered as a group of different work centers
- D. Machine or individual
Answer: B
NEW QUESTION 139
The number of time an item is counted in a year is called its count frequency.
- A. False
- B. True
Answer: B
NEW QUESTION 140
If the opening inventory is 400 units, demand is 900 units, and production is 800 units, what will be the ending inventory?
- A. 300 units
- B. 400 units
- C. 200 units
- D. 350 units
Answer: A
NEW QUESTION 141
1. Flow of work through the shop is varied and depends on the design of a particular product. As orders are processed, they will take more time at once workstation than at another. Thus, the work flow is not balanced.
2. Machinery and workers must be flexible enough to do the variety of work. Machinery and work centers are usually grouped according to the function they perform (e.g. all lathes in one department).
3. Throughput times are generally long. Scheduling work to arrive just when needed is difficult, the time taken by an order at each work center varies, and work queues before work centers, causing long delays in processing. Work-in-process inventory is often large.
4. The capacity required depends on the particular mix of products being built and is difficult to predict. These are the characteristics of:
- A. All of these
- B. Flow manufacturing
- C. Project manufacturing
- D. Intermittent manufacturing
Answer: C
NEW QUESTION 142
In a product design, a is carefully established specification covering the product's material, configuration, measurement, and so on.
- A. Routine of process
- B. Machinery
- C. Technique
- D. Standard
Answer: D
NEW QUESTION 143
Today production control works in a demanding environment shaped by six major challenges. Which one of the following is not of those challenges?
- A. Customer that are never satisfied
- B. None of these
- C. A supply chain that is large and must be manage
- D. A product life cycle that is getting shorter and shorter
Answer: B
NEW QUESTION 144
A calculated extra amount of stock carried and is generally used to protect against quantity uncertainty in known as:
- A. Average stock
- B. Secure stock
- C. Safety stock
- D. All of the above
Answer: C
NEW QUESTION 145
CRP inputs are all of the following EXCEPT:
- A. None of these
- B. Routings and time standards
- C. Planned order releases and work center capacities
- D. Open shop orders and leads times
Answer: A
NEW QUESTION 146
Which of the following is NOT the source of waste in the operation and management of the manufacturing system?
- A. Product defects
- B. Inventory
- C. Overproduction
- D. Waiting time
Answer: A
NEW QUESTION 147
Operation number
Setup hours, planned and actual
Quantity reported complete at the operation
Quantity reported scrapped at that operation
Due date or lead time remaining
These are the components of related to each operation.
- A. None of these
- B. Work-center master file
- C. Shop order master file
- D. Shop-order detail file
Answer: D
NEW QUESTION 148
A good MRP system generates exception messages:
- A. When there are problems that need the attention of the planner
- B. To advise the planner when some event needs attention
- C. Both A & C
- D. When the manufacturing process is under control
Answer: C
NEW QUESTION 149
......
Format of APICS CPIM: Certified in Production and Inventory Management Exam
- Length of Examination: 180 minutes
- Passing Score: 63%
- Number of Questions: 80
- Format: Multiple choices, multiple answers
Use Real APICS Achieve the CPIM Dumps - 100% Exam Passing Guarantee: https://www.dumpsactual.com/CPIM-actualtests-dumps.html
Free Test Engine Verified By APICS Certification Certified Experts: https://drive.google.com/open?id=1-2c8JC4RKESNHSFELUZsQ1RbPhZV5wEc
