Share Latest Sep-2023 350-501 DUMP with 373 Questions and Answers [Q36-Q61]

Share Latest Sep-2023 350-501 DUMP with 373 Questions and Answers

PDF Dumps 2023 Exam Questions with Practice Test

Cisco 350-501 certification exam is ideal for professionals looking to advance their careers in the service provider industry. Implementing and Operating Cisco Service Provider Network Core Technologies certification validates the skills required to implement and operate complex service provider networks, making candidates highly sought after by employers. Implementing and Operating Cisco Service Provider Network Core Technologies certification is also an excellent way for candidates to showcase their expertise and differentiate themselves in the highly competitive job market. Passing the Cisco 350-501 certification exam is a significant achievement that demonstrates a candidate's commitment to professional development and growth in the field of service provider network technologies.

NEW QUESTION # 36
A router is configured to perform MPLS LDP graceful restart.
Which three steps are included when the RP sends an LDP initialization to a neighbor to establish an LDP session? (Choose three)

A. Graceful restart capability in OPEN message
B. Learn from Neighbor (N) flag, set to 1
C. Recovery Time field
D. Type-9 LSA
E. Reconnect Timeout field
F. Learn from Network (L.) flage, set to 1

Answer: C,E,F

NEW QUESTION # 37
Refer to the exhibit.

Router 4 is added to the network and must be in the same area as router 1. Which NET should the engineer assign?

A. 49.0111.0000.0000.0001.00
B. 49.0011.0000.0000.0003.00
C. 49.0001.0000.0000.0004.00
D. 49.0011.0000.0000.0002.00

Answer: B

NEW QUESTION # 38
Refer to the exhibit:

Which statement describes this configuration?

A. Router 1 has a new data store to collect SNMP information, but configuration must still be done at the CLI only
B. Router 1 has a temporary data store where a copy of the running configuration can be manipulated and verified before committing the configuration
C. Router 1 can be remotely managed by the CLI using Telnet
D. Router 1 has its running configuration locked so changes can be made only when the administrator issues a kill session

Answer: B

NEW QUESTION # 39
Refer to the exhibit:

An engineer is preparing to implement link aggregation configuration.
Which statement al about this configuration is true?

A. The switch port negotiates an EtherChannel if it receives LACP packets from a connected peer
B. The switch port accepts LACP and PAgP packets from a connected peer and negotiate an EtherChannel using the common EtherChannel mode.
C. The switch port actively sends packets to negotiate an EtherChannel using PAgP
D. The switch port passively negotiates an EtherChannel if it receives PAgP packets from a connected peer

Answer: C

NEW QUESTION # 40

Refer to the exhibit. Which statement describes the effect of this configuration?

A. It matches HTTP traffic for use in a policy map.
B. It applies a service policy to all interfaces remarking HTTP traffic.
C. It modifies the default policy map to allow all HTTP traffic through the router.
D. It creates an ACL named WEB that filters HTTP traffic.

Answer: A

Explanation:
Section: Services

NEW QUESTION # 41
Refer to the exhibit:

A network engineer is implementing a BGP routing policy.
Which effect of this configuration is true?

A. All traffic is assigned a local-preference of 30O regardless of its destination
B. All traffic that matches acl10 is dropped without any change to its local-preference
C. All traffic that matches acl10 is allowed without any change to its local-preference
D. If traffic matches acl10, it is allowed and its local-preference is set to 300

Answer: C

NEW QUESTION # 42
A network engineer must implement SNMPv2 with these parameters:
- Enable SNMP community string C1sc0 with read-only permissions.
- Enable interface index persistence.
- Restrict the SNMP community to only the monitoring server with IP
address 198.18 19 100/32.
- Provide view-only access to ospflfEntry and ospfNbrEntry.
Which configuration must the engineer apply?

Answer: D

NEW QUESTION # 43
Refer to the exhibit:

It the NetFlow configuration is updated to version 9, which additional piece of information can be reported"?

A. IPv4 flow information
B. BGP AS information
C. IPv6 flow information
D. flow sequence numbers

Answer: C

NEW QUESTION # 44
Refer to the exhibit:

An engineer is preparing to implement data plane security configuration.
Which statement about this configuration is true?

A. Router 1 must be configured with uRPF for the RTBH implementation to be effective.
B. Router 2 must configure a route to null 0 for network 192 168.1 0/24 for the RTBH implementation to be complete.
C. Router 2 is the router receiving the DDoS attack
D. Router 1 is the trigger router in a RTBH implementation.

Answer: B

NEW QUESTION # 45
Refer to the exhibit. A network engineer notices PE-21 convergence degradation due to the growing LSDB size of Level 2 areas in the network. The engineer decides to migrate router PE-21 from an inter-area design to an intra-area implementation. Inter-area routing must be accomplished via an ATT-bit set by the Level 1/Level 2 router. Which configuration must the engineer implement on PE-21 to complete the migration?

A. configure terminal
router isis 1
net 49.5000.0100.1222.0022.00
is-type level-1
end
B. configure terminal
router isis 1
no net 49.0200.0100.1202.0021.00
net 49.5000.0100.1202.0021.00
is-type level-1
end
C. configure terminal
router isis 1
no net 49.0200
net 49.5000
is-type level-1-2
end
D. configure terminal
router isis 1
net 49.5000.0100.1202.0021.00
is-type level-1-2
end

Answer: B

NEW QUESTION # 46
Which action does the ingress VTEP perform on traffic between EVPN VXLAN overlays?

A. routing when doing asymmetric IRB
B. bridging when doing symmetric IRB
C. routing and bridging when doing asymmetric IRB
D. routing and tunneling when doing symmetric IRB

Answer: C

Explanation:

https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide- c07-734107.html

NEW QUESTION # 47
Which additional feature does MPLS DiffServ tunneling support?

A. matching EXP and DSCP values
B. using GRE tunnels to hide markings
C. PHB layer management
D. interaction between MPLS and IGP

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_te_diffserv/configuration/15-mt/mp-te-diffserv-15-mt-book/mp-diffserv-tun-mode.html

NEW QUESTION # 48
An engineer working for a private telecommunication company with an employee id: 3948:11:613 needs to limit the malicious traffic on their network.
Which configuration must the engineer use to implement URPF loose mode on the GigabitEthernet0/1 interface?

Answer: D

Explanation:
"reachable-via any" must be configured for Loose mode on both IPv4 & IPv6.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_data_urpf/configuration/xe-3s/sec-data-urpf-xe-3s-book/sec-unicast-rpf-loose-mode.html

NEW QUESTION # 49
An engineer is implementing MPLS to monitor within the MPLS domain. Which must the engineer perform to prevent packets from being forwarded beyond the service provider domain when the LSP is down?

A. Option A
B. Option D
C. Option B
D. Option C

Answer: C

NEW QUESTION # 50
Refer to the exhibit. A network engineer is implementing OSPF multiarea.
Which command on interface GO/1 resolves adjacency issues in the new area?

A. ip ospf network non-broadcast
B. ip ospf network point-to-multipoint
C. ip ospf network broadcast
D. ip ospf network point-to-point

Answer: D

NEW QUESTION # 51
You are testing the capabilities of MPLS OAM ping.
Which statement is true?

A. MPLS OAM ping works solely with P2P LSPs
B. An LSP breakage results in the ingress MPLS router never receiving any reply
C. An LSP is not required for the reply to reach the ingress MPLS router
D. MPLS OAM ping works solely with Cisco MPLS TE

Answer: C

Explanation:
An MPLS echo reply is sent in response to an MPLS echo request. The reply is sent as an IP packet and it is forwarded using IP, MPLS, or a combination of both types of switching.
Head-end router will receive an echo-reply from the last router (before the broken binding), and that reply will be: 'U' - unreachable.

NEW QUESTION # 52
Refer to the exhibit:

When implementing an LDP protocol, an engineer experienced an issue between two directly connected routers and noticed that no LDP neighbor exists for 1.1.1.1.
Which factor should be the reason for this situation?

A. R2 does not see any hellos from R1
B. R2 sees the wrong type of hellos from R1
C. LDP needs to be enabled on the R2 loopback interface
D. LDP needs to be enabled on the R2 physical interface

Answer: A

NEW QUESTION # 53
Drag and drop the NAT64 descriptions from the left onto the correct NAT64 types on the right.

Answer:

Explanation:

Explanation
Stateful (It has 1: N translation, It uses address overloading, It conservers IPv4 addresses) Stateless (It is limited on the number of endpoints, It mandates IPv4-translatable IPv6 address allocation)

NEW QUESTION # 54
Refer to the exhibit.

A network engineer Is implementing OSPF multiare
a. Which command on interface G0/1 resolves adjacency Issues in the new area?

A. Ip ospf network non-broadcast
B. Ip ospf network broadcast
C. Ip ospf network point-to-point
D. Ip ospf network polnt-to-multlpoint

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/xe-16/iro-xe-16-book/iro-multi-area-adj-xe.html

NEW QUESTION # 55
Refer to the exhibit:

With which router does IOSXRV-1 have LDP session protection capability enabled but session hold up is not active?

A. 192.168.0.1
B. 192.168.0.3
C. 192.168.0.5
D. 192.168.0.4

Answer: B

NEW QUESTION # 56
Refer to the exhibit. A network operator working for a telecommunication company with an employee 3994:37:650 is implementing a cisco Unified MPLS solution.
What is the effect of this implementation?

A. EIGRP is deployed between the PEs and ABRs with RFC 3107.
B. OSPF is deployed between the PEs and ABRs with RFC 3107.
C. IS-IS is deployed between the PEs and ABRs with RFC 3107.
D. BGP is deployed between the PEs and ABRs with RFC 3107.

Answer: D

Explanation:

NEW QUESTION # 57
Drag and drop the functionalities from the left onto the correct target fields on the right.

Answer:

Explanation:

NEW QUESTION # 58
Refer to the exhibit. Which effect of this configuration is true?

A. R1 can support a graceful restart operation on the peer, even if graceful restart is disabled on the peer
B. R1 can failover to any peer
C. R1 can support a peer that is configured for LDP SSO/NSF as the peer recovers from an outage
D. R1 can failover only to a peer that is configured for LDP SSO/NSF

Answer: C

Explanation:
https://www.cisco.com/en/US/docs/general/Test/kwoodwar/fsgr29s.html

NEW QUESTION # 59
Refer to the exhibit.

An engineer is configuring multitopology IS-IS for IPv6 on router R1. Which additional configuration must be applied to the router to complete the task?